Matte Black Aluminum

Series : 1050, 1060, 1100, 3003, 3004, 3005 3105, 5005, 5052

Temper : H14, H16, H24 etc

Thickness : 0.18 - 1.5 mm

Width : 10 - 2650 mm

Coating : PE, PVDF, HDPE, FEVE

Colors : Matte black

Application : Roofing, composite panel, curtain wall, siding, ceili

Detailed Description

Matte black aluminum is a black aluminum alloy material with a matte surface treatment, which has good aesthetics and practicality. Matte black aluminum sheet are usually treated by processes such as powder coating or coating to create a matte effect, with a smooth, matte surface and low reflectivity.

Properly treated matte black aluminum are generally more wear-resistant and can resist scratches from daily use. Matte black is a dark hue that creates a modern, minimalist look. Compared to glossy black aluminum sheet, matte surfaces are less likely to show fingerprints and dirt, and are easier to clean and maintain.

Specification of Matte Black Aluminum:

Aluminum Alloy:	1050 1060 1100 3003 3004 3105 5005 5052 5754 8011 etc.
Thickness:	0.08-5.0mm
Width:	＜2650mm
Coils Core Diameter:	150mm, 405mm, 505mm, 508mm, 510mm
Coating Thickness:	PVDF>=25micron, PE>=18micron
Color Standard:	E < 2 or it is not obvious by eyeballing
Pencil Hardness:	> 2HB
Coating Adhesive:	not lower than first grade Impact: no any crack (50kg/cm, ASTMD-2794:1993)
T Bend:	≤ 2 T
Boiling Point:	no any distortion and color change (in the 99 more or less 1 degree water, then cooling 2 hours)
Corrosive:	surface deep in the 5% muriatic acid and 5% NaCL, indoor deep in the 2% muriatic acid and 2% NaCL, after 48 hours, no change